Smoking

Boopster

Member
Joined
Aug 1, 2021
Messages
31
Media
1
Reaction score
30
Location
Houston, Tx
I have a

PBV4PS2 and I was waiting for it to get to temp and it was just full of smoke not sure what I did but I emptied the burner cup not sure if that's what you call it. Also I set my temp but it won't stop climbing.​


 
It's very important that you have door open till it gets going. That first smoke build up can ignite and blow with a shot of oxygen. Backdraft
Ok I will try that next time. So just to be sure it will get to temp with door open?
 
Always leave your door open during start up. The Heavy white smoke is normal. As soon as your fan kicks in the Heavy smoke will go away and you are safe to close the door. Then it will come up to temp.
 
Last edited:
Always leave your door open during start up. The Heavy white smoke is normal. As soon as you fan kicks in the Heavy smokecwill go away and you are safe to close the door. Then it will come up to temp.
Thank you so much still new to this craft and I was getting worried that I'm doing something wrong'
 

Latest Discussions

Back
Top