Ignitor problem

[Bigb151]

Haven't looked to far into the forum to find anything on this but I cleaned my laredo 1000 and now the ignitor will randomly throw the code I've gotten it to heat up to 350 for 1hr and stay at 225 for roughly 45 min but each time it will say err and flash the ignitor symbol any help on this

 

[Sparky]

Welcome to the group

 

[Cowboy1955]

Welcome from Texas to the group!
Clean your temperature probe and check the connection
If this doesn’t work you’ll have to replace it
Hopefully this helps you

 

[Bigb151]

Welcome from Texas to the group!
Clean your temperature probe and check the connection
If this doesn’t work you’ll have to replace it
Hopefully this helps you

This makes sense because on the app I will get a overheating notification then the ignitor code will definitely try cleaning the temp probe

 

[Freedbyjc]

Haven't looked to far into the forum to find anything on this but I cleaned my laredo 1000 and now the ignitor will randomly throw the code I've gotten it to heat up to 350 for 1hr and stay at 225 for roughly 45 min but each time it will say err and flash the ignitor symbol any help on this

You’re experiencing a controller issue. You (and all new Wi-Fi PID controllers) have an auto relight feature. Instead of activating, it’s causing the controller to ERR out and shut down.

Call Danson’s customer service at 480-923-9630 Or 480-542-9449 for information or suggestions for the new app, or operating assistance or for a warranty registration or parts replacement. In Canada: Phone: 1-877-942-2246 And 877-303-3134 and 877-942-2246 are the Danson’s tech line.

Also definitely leave your phone number for call back if prompted to.

You can also Try the chat feature on the PitBoss website. https://pitboss-grills.com/



If your controller is the issue they can diagnose it and get it replaced under warranty for you.